Product Description
12 oz. bottle of T-Rex Anti-Skid/Slip Additive, enough for 4 quarts of T-Rex, SMR-1000-AS. Also included is a mixing cup for measuring the Anti-Skid additive.
-
Tough durable polymer particles
-
Mar, scuff & abrasion resistant
-
Very strong, but light weight
-
Yields a resilient non-slip surface
-
Gives a uniform textured look
Use at 10% of mixed liner
1. Add 3 fluid ounces to an un-activated quart bottle of T-Rex liner.
2. If using the tint-able T-Rex liner, add your 3 ounces of color (tint) first, then add the 3 ounces of the SMR-1000-AS.
3. Then activate, replace cap and shake for 2 minutes before applying.
Health and Safety:
See Material Safety Data Sheet and labels for additional safety information and handling instructions.
*
The contents of this package may have to be blended with other components before the product can be used. Before opening the packages, be sure you understand the warning messages on the labels and MSDS’s of all components, since
the mixture will have the hazards of all its parts.
* Improper handling and use, for example, poor spray technique, inadequate engineering controls and or lack of Personal Protective Equipment (PPE), may result in hazardous conditions or injury.
* Follow spray equipment manufacturer’s instructions to prevent personal injury or fire.
* Provide adequate ventilation for health and fire hazard control.
*
Follow company, product MSDS and respirator manufacturer’s recommendations for selection and proper use of respiratory protection. Be sure employees are adequately trained on the safe use of respirators per company and regulatory
requirements.
* Wear appropriate PPE such as eye and skin protection. In the event of injury, see first aid procedures on MSDS.
* Always observe all applicable precautions and follow good safety and hygiene practices.
Product Videos
Custom Field
Product Reviews
1 Review Hide Reviews Show Reviews
-
Anti Skid
Worked just as they claimed even when wet you don't slip.
