Product Description
Can be used to Brighten other silver base coats.
INSTRUCTIONS:
Shake thoroughly before use.
Reseal after each use.
APPLICATION:
1. For maximum chrome effect, only apply SMR-ARGC over a smooth cured gloss black primer/single stage.
2. Spray very light coats (2-3 coats) of SMR-ARGC until the desired chrome/silver look is achieved.
3. So that you move the metallic leaves as little as possible, have the SMR-ARGC cure as long as possible or force cure with 120 degree F heat lamp for 20 minutes.
4. At room temperature, apply light coats of a non-aggressive (mild solvents like in our SMR-130) clear coat to protect the chrome silver.
Health and Safety:
See Material Safety Data Sheet and labels for additional safety information and handling instructions.
The contents of this package may have to be blended with other components before the product can be used. Before opening the packages, be sure you understand the warning messages on the labels and MSDS’s of all components, since
the mixture will have the hazards of all its parts.
Improper handling and use, for example, poor spray technique, inadequate engineering controls and or lack of Personal Protective Equipment (PPE), may result in hazardous conditions or injury.
Follow spray equipment manufacturer’s instructions to prevent personal injury or fire.
Provide adequate ventilation for health and fire hazard control.
Follow company, product MSDS and respirator manufacturer’s recommendations for selection and proper use of respiratory protection. Be sure employees are adequately trained on the safe use of respirators per company and regulatory
requirements.
Wear appropriate PPE such as eye and skin protection. In the event of injury, see first aid procedures on MSDS.
Always observe all applicable precautions and follow good safety and hygiene practices.
Not for sale in California, Maryland or Delaware
