This sale is for a gallon of Acrylic Fast Dry 2.1 voc 1K Sealer Gray, one Gallon , SMR-265, Ready to Spray
The SMR-265 is 2.1 lbs/gallon voc and compliant everywhere.
The SMR-265 is a fast dry, with great color and gloss holdout.
- Shake or stir before using
- Excellent adhesion
- Great adhesion
- Lays down super smooth
Sand primers with 400-600 grit and clean.
SPRAY GUN SETUP
HVLP Gun: Fluid Tip 1.3 mm, Spray Pressure 8-10 psi
Apply 1 uniform coat using a good quality spray gun with a 1.3mm-1.4mm fluid tip.
Allow 30 minutes before topcoating.
This product was designed for and is intended solely for use by trained professionals. Read all
warning statements and heed all recommended safety precautions before proceeding.
DO NOT USE THIS SYSTEM WITHOUT SUFFICIENT VENTILATION. Users must wear appropriate,
properly fitted NIOSH-approved activated charcoal cartridge respirator if a forced fresh-air
system is not available. Always wear eye and face protection, as well as gloves and protective
clothing. Do not use this product, or be exposed to spray mist / vapors if you have respiratory
problems. KEEP OUT OF REACH OF CHILDREN AND PETS.
This system comprises multiple components. Once mixed, this system will have hazards of all
components. Read warnings on all packages before opening.
3 Reviews Hide Reviews Show Reviews
acrylic fast dry sealer
love the product.
Great sealer, sprays great and left a very smooth finish. Used about a half gallon to spray a 2004 accord.
Best 1k sealer
Very convenient, no mixing required just give the can a shake, dump it in the gun and spray 1 wet full coverage coat, wait 5-10 min and it's ready for basecoat!!! Very good for fast production