Product Description
This product is not available in California, Maryland, or Delaware. Please order SMR-221. Please note, If you order this product to be shipped to these states, a replacement may be used and will delay your shipping.
This sale is for a gallon kit of Super Fill High Build 2K Urethane Primer Gray Gallon Kit, SS-2790G/SS-2790A.
The SS-2790G/SS-2790A is a 4.8 lbs/gallon voc (National Rule product). Not for sale in 2.1 lbs/gallon voc areas.
The SS-2790G/SS-2790A is a fast dry, easy sanding 2K urethane primer with great fill, and color/gloss holdout.
- Easy 4:1 mix
- Super High build and fill
- Sands great
- Great adhesion
- Medium gray color
- Fast dry
- True 2K urethane
- Excellent value (cost)
- Free Shipping
Not for sale in California, Maryland or Delaware
Health and Safety:
See Material Safety Data Sheet and labels for additional safety information and handling instructions.
*
The contents of this package may have to be blended with other components before the product can be used. Before opening the packages, be sure you understand the warning messages on the labels and MSDS’s of all components, since
the mixture will have the hazards of all its parts.
* Improper handling and use, for example, poor spray technique, inadequate engineering controls and or lack of Personal Protective Equipment (PPE), may result in hazardous conditions or injury.
* Follow spray equipment manufacturer’s instructions to prevent personal injury or fire.
* Provide adequate ventilation for health and fire hazard control.
*
Follow company, product MSDS and respirator manufacturer’s recommendations for selection and proper use of respiratory protection. Be sure employees are adequately trained on the safe use of respirators per company and regulatory
requirements.
* Wear appropriate PPE such as eye and skin protection. In the event of injury, see first aid procedures on MSDS.
* Always observe all applicable precautions and follow good safety and hygiene practices.
Product Videos
Videos Hide Videos Show Videos
Custom Field
Product Reviews
19 Reviews Hide Reviews Show Reviews
-
Thick as mud!
Talk about thick! When I first put my stir stick in I was a bit worried it might end up being a pain to spray but after adding the one part activator and 10% reducer it sprayed like silk from a 2.0 gun at 20 psi. Covered sanding marks no problem, dried fast and sanded super easy with 120 and 220 on a 16" block. Closest price I can get on anything else is my area is $159. So to me this is a great price. Used 16 oz to put 4 coats on a 68 f100 hood. Should easily be able to do a full car with one gallon and have some left over!
