Product Description
SMR-115 is a UV resistant fast cure urethane clearcoat designed for anywhere a low gloss clear is needed. The gloss level is variable depending on the mix ratio of clearcoat and activator (see below).
The SMR-115 is a Low VOC, 2.1 lbs/gallon VOC product. Compliant in all areas.
This sale is for a gallon of SMR-115, low gloss clear and a 32 oz. can of SMR-150, medium speed (60°F - 75°F) activator.
MIX RATIOS
SEMI GLOSS 4 Parts: SMR-115 1 Part: SMR-150 / SMR-170 5% Zero VOC Reducer (Optional)
EGG SHELL 5 Parts: SMR-115 1 Part: SMR-150 / SMR-170 5% Zero VOC Reducer (Optional)
LOW SHEEN 6 Parts: SMR-115 1 Part: SMR-150 / SMR-170 5% Zero VOC Reducer (Optional)
Activator Options: SMR-150 (Regular Activator) or SMR-170 (High Temp Activator)
REDUCER OPTIONS: Zero VOC Reducers: SMR-0065 (Fast), SMR-0075 (Medium), SMR-0085 (Slow).
APPLICATION: Apply 2 Full Wet Coats allowing 10-15 minutes flash between coats.
- 50 State Compliant
- Multiple gloss levels from one product
- UV Resistant for excellent weathering
- Three easy mix ratios
- True 2K Urethane at a Great Price
Tech Tip: Spraying low gloss clears above 85°F may cause cloudy stripes.
| Feedback |
Product Videos
Custom Field
Product Reviews
4 Reviews Hide Reviews Show Reviews
-
Low Gloss Clear
So to start out, I am not a pro, just an avid hobbyist working on a 55 Chevy 3100 that i wanted the light patina look. Have used Speedokote primers on several projects with great results, this it my 1st try with any of their top coats. I prepped for the clear by sanding the catalyzed single stage finish with 400 wet to bring out the colors underneath (to get the patina i was after). Mixed it 5 to 1 for "eggshell" and it was spot on. Shot it using a devilbis millennium 2000 gun with a 1.3mm tip at 28psi. Shop was a little warm so added ~2% reducer. Calls for 2 full wet coats. As I was getting going i had concern of running low on material so i went a little lighter. Should have ordered 1.5 gallons and followed the directions. Im still very happy with the look, just a couple of lower sheen areas. Not the fault of the paint, the fault of the old hack behind the gun! In reflection, I would shoot with a 1.4 nozzle, 2 full wet coats and make sure i had enough material! Great product.
-
Worked great!
Shot 5:1 ratio on a nova wagon. Cleared looked great. Compared to other low gloss clears I’ve used this one took quite a while to gas off to the desired sheen. After 8-10 hours clear was a uniform sheen as expected.
-
Awesome easy to use
Really user friendly mixing instructions. Nice even finish.
-
Awesome easy to use
Great product